What is SanCloud Stratus AM62x Module?

The SanCloud Stratus ST-AM62x module is a design that places the core components required to support the Ti AM62x processor and exposes the majority of its I/O via the board edge pads. This module design facilitates direct soldering to the host expansion board to provide the external interface circuitry.

Using the SanCloud ST-AM62x module reduces the integration cost of the host expansion board as only solder pads are required to facilitate a connection.

With an extended operating temperature range of –40°C to 105°C it can be used in harsh temperature environments.

AM62x Processor: 

• Single/Dual/Quad-Core ARM Cortex-A53 @ 1.4GHz
• 1GB/2GB DDR4 400MHz
• 8GB/16GB, 8bit Embedded MMC
• 2.5” x 1.9” / 63mm x 48mm Module
• Mali400 MP2 @ 600Mhz

Connectivity

• Up to 2 RGMII ports
• 24bit RGB parallel LCD Port
• Up to 3 CAN-FD ports
• 6 channel I2S port
• Up to 5 I2C ports
• Up to 5 UARTs with flow control
• 2 SDIO ports (one for SD card)
• Up to 3 SPI ports
• MIPI-CSI D-PHY camera port
• 2 USB2.0 ports, supporting host or device operation
• Up to 109 GPIO depending on port usage.
• JTAG (Segger Jlink)

With the addition of 256Mb Winbond TrustME® Secure Flash to the Stratus AM62x module it strengthens the robustness by securing code and data storage for trusted boot and firmware updates using external secure flash.  This can be achieved with our SanCrypt security infrastructure.

Software Compatibility

• Debian/Linux
• Android

Design Support

SanCloud can provide Altium format PCB schematic and footprint library for the Stratus ST-AM62x module along with DXF file for PCB shape and dimensions.